The problems of concealing grouting and hard materials can be overcome. Coating paper, if correctly applied, may expand over and cover the rough spots and the consequence can be done by using a major or stamped wallpaper. This technique also relates to walls built of cement blocks. If you're creating with brick or cement block and realize that you wish to picture certain walls, ask your contractors to utilize the mortar so that you have a good flat work surface, rather than raking out the joints. With existing surfaces, the secret is in preparing.

The raw surface. They are the tools you'll need A lengthy table or table, a trough, sponge or foam substance contractor, scissors, smooth comb for removing picture onto wall, a ruler, plumb point, blade for cutting. A paint wax is applied to dried any humidity from the wall, a latex based background fluid size. A well soaked pre-pasted background lining will be only ample to ease the size and bond the lining firmly to the wall so that after background is pasted around, it won't damage in virtually any way. The same theory can even. بلوک سیمانی

Be applied if you should be papering over rough-caste walls (walls which have been plastered and raked or scrolled upon when wet). If your brick wall posseses an excessively hard and elevated floor it will need to be plastered around ahead of wall-papering. This is how it's performed:- Previous to start focusing on an proof natural wall, you're first step is to close and measurement the wall. Fur it with a paint sealer and leave to dry overnight. Next apply a latex based picture water size; that is especially great on absorbent surfaces. This requires about an hour or so to dry.

If time is short you can apply two coats making an hour or so between layers, rather than the over- evening sealer. Apply pre-pasted lining paper. Bathe it in a trough to ease and throw out to arm's length. Flip around and right back half-way, forming pleats to the conclusion of the roll. Holding the most truly effective piece of report in a single hand, and pleats in one other, grow the first pleat across the wall and flatten out with sponge. Grow next fold and flatten and therefore to the end of the roll. To paper around a corner, keep 25 mm (one inch) overlap and "butt" the adjacent.